RFID Management for Garbage Sorting Program Introduction

Classification of domestic garbage is a systematic project, classification effectiveness enhancement needs to be classified put, classified collection, classified transportation, classified treatment of all aspects of the responsibility of the person to regulate the behavior, standardize the operation, the formation of behavioral habits.

 In response to the implementation requirements of the waste separation program, the entire process of waste bins placed at the source - drop-off points - transfer stations - sorting and transportation vehicles - resource utilization facilities, etc., will be supervised.

RFID read-write is installed on the side of the top of the canopy, wall mounted or pole mounted, basically covering the entire garbage drop-off area (mainly covering the food waste garbage cans must pass through), the installation height of 2.5-5 meters. Angle: it is appropriate to use the front downward tilt 0 ° ~ 30 °, should try to cover the garbage cans at the drop-off point, to be able to cover the location of the food waste bin.

RFID cards are mounted on both sides flanks depending on the appearance of the food waste bin.

	RFID reader technical parameters
	Operating frequency	902～928 MHz(AFSL)
	Air interface protocol	ISO 18000-6C (EPC Class 1 Gen 2 )
	Antenna Gain	3dBi circular polarization
	Output power	30 dBm (software adjustable)
	Communications interface	RJ45, RS232 data interface
	Industrial lightning protection	6000V high voltage lightning protection
	Reading distance	Stable reading of 3 meters (reading distance is related to the tag and the field environment)
	Power supply	Industrial wide voltage design 9-36V DC
	Operating temperature	-20℃~+60℃
	Storage temperature	-30℃~+70℃
	Humidity level	5-95%, non-condensing
	Sealing Grade	IP66

	Technical parameters of RFID tags
	Applicable carrier frequency	860～928MHz
	Standards-compliant	ISO 18000-6C (EPC Class 1 Gen 2 )
	Microchip	Alien/higgs3
	Operating mode	Passive
	Service life	Write 100,000 times, data retention for 10 years.
	Applications	Vehicle management, sanitation buckets and other areas
	Reading distance	6 meters (reading distance is related to the reader and site environment)
	Sizes	(L)135×(W)21×(Th)12.5mm

• Year Established
  --
• Business Type
  --
• Country / Region
  --
• Main Industry
  --
• Main Products
  --
• Enterprise Legal Person
  --
• Total Employees
  --
• Annual Output Value
  --
• Export Market
  --
• Cooperated Customers
  --